ICP: How to achieve WAFER-5822's TV-OUT output

Feb 11

Posted by Tiny at 14:55 | Default | Comments(0) | Reads(84) | From Original

how WAFER-5822's TV-OUT output

1. Signals to the correct line to connect
WAFER-5822's TV-OUT output to connect to JP2 (please Reference to the manual), close to the JP3 (reset) to the side of the earth from the side of the BIOS ROM chips to start from right to left for 1, 3, 5 (to), corresponding to the other side of the 2.4.6.
Corresponding statement on the pin and the color signal lines are as follows: 1 - black, 2 - White (two-pin socket); 3 - red, 4 - yellow, 5 - black, 6 - White (4-pin socket).

2. Software installation
to achieve TV-OUT function on the correct installation of the display driver. Incidental to the CD-ROM in \ VGA under \ MediaGx under the appropriate operating system installed on the drive. Win9x drivers for the next decompression software, installed in the display driver when you want to Specify the correct path to the document. Right after installation, \ display \ settings \ high-level dialog box, multi-page menu should appear in the menu to set up TV-OUT functionality

that this is only a reference, based on a random manual and CD-ROM installation.