Title: ICP: How to achieve WAFER-5822's TV-OUT output
FromElec-intro
Time:Wed, 11 Feb 2009 14:55:54 +0000
Author:Tiny
URL:http://www.elec-intro.com/achieve-WAFER-5822-TV-OUT/

Content:
how WAFER-5822's TV-OUT output1. Signals to the correct line to connectWAFER-5822's TV-OUT output to connect to JP2 (please Reference to the manual), close to the JP3 (reset) to the side of the earth from the side of the BIOS ROM chips to start from right to left for 1, 3, 5 (to), corresponding to the other side of the 2.4.6.Corresponding statement on the pin and the color signal lines are as follows: 1 - black, 2 - White (two-pin socket); 3 - red, 4 - yellow, 5 - black, 6 - White (4-pin socket).

2. Software installationto achieve TV-OUT function on the correct installation of the display driver. Incidental to the CD-ROM in \ VGA under \ MediaGx under the appropriate operating system installed on the drive. Win9x drivers for the next decompression software, installed in the display driver when you want to Specify the correct path to the document. Right after installation, \ display \ settings \ high-level dialog box, multi-page menu should appear in the menu to set up TV-OUT functionality
that this is only a reference, based on a random manual and CD-ROM installation.




 


Generated by Bo-blog 2.1.0