USB/RS485 interface cable for Schneider PLC programming,2.5 meters,with master/slave switch,connect the TER and AUX port of PLC,the largest communication distance of up to 2 kilometers.
Not isolated,so it doesn't support hot plug,if need isolated cable,pls choose TSXPCX3030+,you can click the following website for TSXPCX3030+:
TSXPCX3030 programming cable simulate USB port as traditional
serial port (usually COM3), which enables existing programming software to
communicate through simulated traditional port and PLC devices.
TSXPCX3030 is used for communication between Modicon TSX series PLC and PC
with USB port.
TSXPCX3030 supports TSX Premium(57),TSX Micro(37),TSX Nano(07),TSX Naza(08) and Twido.
TSXPCX3030 programming cable contains a Master/Slave switch which is used to
select different working mode instead of PLC controlling RS485.Data
sending and receiving is switched automatically,so the cable can be used for
multi-station and point-to-point communication.
The TER port of TSX
series PLC has a DPT signal which is used to distinguish the working mode of the
port.If the DPT signal is high level,then the TER port is under Uni-Telway Master
mode which is a requirement for PLC programming.If DPT signal is low level,then
the TER port working mode is determined by the PLC.
Switch M / S corresponding mode
the Control flow of data
PLC works in main-station model for programming or as
Uni-Telway Master for more points communications
PLC works in slave-station model for other multi-point
Features and technological index:
● support Windows2000/Windows XP operating system
● fully compatible with USB V1.1 norms and USB CDC
● USB bus-powered, with current consumption of 50 mA
● baud rate: 300 bps ~ 1Mbps automatically adaptive.
● apply to the TSX Premium, Micro, Naza, Nano and
● each PC only supports a TSXPCX3030 cable
● Length: 2.5 meters, colors: black
TSXPCX3030 needs to install USB device drivers
at first. And to communicate with PLC needs the latest version of the Uni-Telway
or MODBUS driver. The Uni-Telway version which can support TSXPCX3030:
WinNT4/95/98/Me/DOS do not support
The MODBUS version which can support fTSXPCX3030:
WinNT4/95/98/Me/DOS do not support
These drivers are usually included in the
programming software on CD-ROM And for the specific installation steps, please
refer to the instruction files on the CD-ROM drivers, and details are not
necessarily listed here.
After the installation, icons will appear on the
control panel of WINDOWS as follows:
Double-click on the icon, then achieve the
settings, XWAY Test, MODBUS Test communications test of the serial ports (COM
slogan) which is connected with TSXPCX3030 cables. Then the programming software
can be used to complete the normal communication with the PLC.
The largest communications range between the
TSXPCX3030 and PLC are up to 2 kilometers (9600 bps),when external plus
terminals 120 ohm resistance on the RS485 ports (8 pin Mini DIN Male) of the
cable. And a FSACC01 Isolators Box (Schneider's model: TSXPACC01) is need to
install at the end of PLC. 0.5 mm2 unshielded twisted pair lines are used for
When the distance is Over 2,000m, a RS485
repeaters (model: E485GP), can be installed for extending the distance.
Please Note: USB interface cable cannot be
The quality is guaranteed.It's tested before shippment.Not made by Schneider,OEM product as the replacement.After you place the order on line,pls contact us and we will calculate the freight fee for you according to your requirements.The
item will be delivered within 3-5 working days once payment is received
and cleared.Please pay within 3 days after your order.If you need large quantity(more than 20PCS),Pls contact us and we will give you the competitive wholesale price.
This product was added to our catalog on Thursday 13 November, 2008.