USB/MPI+ V4.0 is the USB to MPI and PPI protocol adapter, support S7-300/400
PLC MPI or S7-200 PLC PPI communication. It’s the same as Siemens PC
Adapter USB except that this USB/MPI+ V4.0 doesn’t support profibus
communication. Its driver is the Siemens PC_Adapter_USB driver, and choose
the USB port, not the COM port.
The working power supply of this cable USB/MPI+ V 4.0 is directly from the USB
port, but not the PLC programming interface.
USB/MPI+ V 4.0 is the optoelectronic isolated adapter for industrial design. There
is anti-surging& anti-lightning protection circuit for the USB and RS485 interface.
It support hot plug. It’s suitable for S7-300/400/200 series PLC. In particular, it
applies to the strong interfere industrial scene and the safeguard in the circuit
guarantees the safely running of the system.
USB/MPI+ principle and figure structure:
Indicator | ON | Flash | Off |
PWR USB | Power On | Error | Error Or Power off |
RxD | Error | Data exchange from PLC | Not Connected |
TxD | Error | Data exchange to PLC | No Data exchange |
Indicator State
Functions
● Support Windows2000/Windows XP/Vista
● Support STEP7 V5.2 and higher,STEP7 Micro/Win 4.0 and higher
● Fully compatible with USB V2.0
● Power supply by USB port(100mA). with overcurrent Protection and Surge Protection
● High optoelectronic isolation voltage up to 1000VDC
● The USB port design with surge protection.
● The RS485 port design with overcurrent protection and lightning
protection:Ipp=100A(10/700us,4KV) .Accord to the standard:ITU-TK20/21,VDE0433. ±15KV ESD Protection.
● Baud rate of MPI port on PLC: 19.2Kbps,187.5Kbps,1.5Mbps. automatically adjust.
● Baud rate of PPI port on PLC: 9.6Kbps,19.2Kbps,187.5Kbps.
automatically adjust.
● Support long distance communication up to 1000m
● Working temperature -20~+75'C
● Length 3 meters.Color:black
● One pc supports one USB programming cable only
This product was added to our catalog on Wednesday 30 December, 2009.
